|
Basically, there are a few steps for
using Mr. Metal Color from GSI Creos Corporation's range of color.
Here are a few simple steps to follow.
Note: Kindly be aware, that the paints
are applied with an airbrush. Increase the air mix volume as
the paint solution has less thinner.
-
Prime the surface of the parts with
Mr. Surfacer.
-
Apply a coat of glossy black
paint, for example Mr. Hobby's Super Black (Mr. Color #157).
-
Next, apply the desired Mr.
Metal Color. Stir the paint well. Only when necessary, add
in a few drops of Mr. Color Thinner for ease of stirring.
-
Once dried, use a soft cloth and
gently polish the surface. Do not be unduly alarmed as the paint
does rub off.
-
To avoid the paint from easily
being rubbed off in addition to give the paint extra gloss, apply
the Mr. Color GX100 Super
Clear III for that polished and shiny surface. The paint mix is
about 30% Mr. Color Thinner, 70% Super Clear.
a. GN Sword after airbrushed with
Super Black
b. GN Sword after airbrushed with
Steel
c. GN Sword after burnishing and
airbrushed with Super Clear III
Special thanks to Code, SF and Snake
King Adrian for the guidance.
|